Fender Pro Tube Reverb

Model/Circuit Number: PR448
Years of Production:
2001 – 2003
Era: Pro Tube Series
Configuration: Combo
Controls: Black, forward facing w/ white labels
Knobs: Black skirted w/ chrome center, numbered 1 – 10

Schematics

Faceplate

  • Front: Input Jack, Channel 1: Volume, Bright Switch, Treble, Bass, Mid, Channel 2: Gain, Treble, Bass, Mid, Master Volume, Channel Select Switch, Reverb, Speed, Intensity, Presence, Pilot Lamp
  • Rear: Power Switch, Standby Switch, Power Cord Connector, Power Fuse, Power Level Switch, Loop Send Level, Send Jack, Loop On/Off Switch, Loop Return Jack, Loop Return Level, Pre Amp Output Jack, Power Amp Input Jack, Footswitch Jack, Power Tube Trouble LED, Power Tube Fuse, Bias Pot, Bias Test Points, Balance Test Points, Balance Pot, External Speaker Jack, Main Speaker Jack

Cabinet

Covering Material

Logo: Grill mounted, raised, chrome & black script
Weight: 75 lbs.
Speaker

Effects: Reverb, Tremolo
~Watts: 12.5 watts / 50 watts – switchable
Tubes

  • Pre amp: 7 x 12AX7, 1 x12AT7
  • Power: 2 x 6L6GC

Bias: Fixed, Each Power Tube Individually Adjustable
Rectifier: Solid State

Comments: Pro Tube Series/Pro Reverb amp. Fender did it a disservice to call it a “Pro Reverb”. It is so different from the blackface and silverface Pro Reverbs that it really doesn’t fit the description, but it is a wonderful amp. On the clean channel at the 12.5 watt setting and with the bright switch clicked in it sounds so much like a Deluxe Reverb that I doubt it you could tell the difference. And the gain channel has a very pleasant, warm presence (not a harsh gain like other Fender amps (Prosonic) seem to have). These were quickly discontinued so there seems to be very few of them out there. – Dave Underwood

26 thoughts on “Fender Pro Tube Reverb

  • October 31, 2011 at 4:22 am
    Permalink

    Love Mine – great for home and Studio – I add a JBL D130 (original) in an early Bandmaster sized 2-12″ enclosure 10X20X30 closed back with a cross over to a hi-freq driver installed in it and the combo does superb with my Pedal Steel, Lap Steels and Guitars.  Would consider owning a backup.

    Reply
    • January 9, 2012 at 2:47 pm
      Permalink

      Selling one right now. http://pittsburgh.craigslist.org/msg/2789236997.html

      Reply
  • February 27, 2013 at 5:21 am
    Permalink

    I have one and gig with it. This amp really got a bad rap. It is not a living room amp. It needs to be played at live-gig volumes so the power tubes are put to work. It doesn’t sound good until its really pushed; you need the room size and air-volume for this amp to really come into its own. It actually sounds like crap in my living room–a definite Jeckel & Hyde thing going on.

    The clean channel sounds great–nice and chimey, a classic Fender sound. Overdrive channel is nice on a Fender amp; I re-tubed the gain stage with a 5751 and it really gave the channel more clarity and definition. Like all tube amps, you can really fine-tune the tone with a retube. Fender isn’t a tube manufacturer and they go to the same marketplace to tube their amps.

    On the “con” side–it is heavy. I hate lugging it around. Also, tube changes are difficult due to the layout of the chassis and the fact that the tube sockets are attached directly to the circuit board under the chassis deck.
    Also, at 1/4 power, the tremolo circuit is under-powered and is barely noticable.

    All in all, this is a great gig gin amp.

    Reply
  • June 11, 2014 at 1:01 pm
    Permalink

    Terrific amp very classic fender chimey sound thang going on here just picked one up for £650 and really happy with it but it definitely needs to be played at gigging volume …..if you want a boudoir amp buy a champ! The stock speaker (Jensen)was a bit shrill on the highs so I swapped it out for a Weber ..good call this is now a different amp night and day

    Reply
  • December 15, 2014 at 10:31 pm
    Permalink

    Im considering a pro now, Im currently using a concert rivera model from the 80’s, a real sweet amp tho Im not overly fond of the low volume sound. its gets real sweet and compressed when your pushing it. I imagine the pro is a lot like that but have not gigged with it. I do like the reverb and vibrato combo on this amp. it will be nice to have one amp with all my fav things which is reverb, vibrato,and pedal 2
    channel switching. maybe my concert and champ will finally be retired after about 20 years or so of use.

    Reply
  • March 28, 2015 at 2:33 pm
    Permalink

    I have this amp and the reverb is making a lot of noise. I want to change the 2 tubes for the reverb/vibrato but I don’t know which ones they are. Can you help?

    Reply
    • June 4, 2015 at 4:19 pm
      Permalink

      The reverb driver is a 12AT7. On the tube chart inside your amp its number V7. All other preamp tubes on this amp are 12AX7’s so it’s not tough to find it.

      Reply
  • July 23, 2015 at 2:46 am
    Permalink

    I have a 2002 pro reverb reissue. I think this is a great amp. It’s a beast of an amp to carry around but aside from that, it’s a great amp. I’m having a problem with it now and it has me scratching my head. I was using the amp a couple of weeks ago and all of a sudden….no output! I took out the tubes and had them tested. One was completely gone and two more were weak. I replaced the three of them. They were 3 of the 12AX7’s. I thought for sure that I had the problem solved. Brought the tubes home, installed them….same issue was present.
    I say that there’s no output but I think it’s more of an input problem. When I tap on the tubes, I can hear the taping noise coming through the speaker. Also when I flick the output switch to full, I can hear a small hiss in the speaker get louder.
    Any suggestions as to what the problem might be would be greatly appreciated!
    Craig

    Reply
  • October 26, 2015 at 6:47 am
    Permalink

    I bought mine new in 05. I just use the clean channel and use a pedal for the OD

    the cleans are fat snappy and warm with clear definition. Plenty of power even at the 12 watt setting which I use most of the time. I use it in the studio as well a bar and out door festival gigs. When im out doors I put it to full volume.

    the reverb is noisy when its above 4 and hums quite badly at 7 or 8 to the point its gets unusable.

    I only use the verb a 1 or 2 so I have no issues.. From what I read on the net theres an inherit problem with the verb circuit. No tech I found was able to correct it but you can tame it with a lower power tube in the verb socket.

    its a great amp very heavy but the tone out weighs any negatives.

    the head it improves with a speaker change but im still using the stock Jensen and I have no need to change anything.

    little know fact is you can use the loop button as a clean boost and use the setting on the back to dial in the amount of boost

    another plus plus is it has external bias and balance pots so tube change take 10 minutes and I can do them by self

    Reply
  • December 17, 2015 at 4:04 am
    Permalink

    I am looking to sell my pro reverb, its in perfect condition and sounds incredible. As there are so few around, I am having trouble working out what an appropriate price is for this model, can anyone give me an idea?

    I am in south London if anyone wants to give me a good price and is interested?

    Reply
    • July 20, 2018 at 4:45 am
      Permalink

      Still looking to sell it Leo? I’m in Surrey and would be keen to buy.

      Reply
  • January 3, 2016 at 5:29 am
    Permalink

    Hi, I’ve had mine since new, don’t understand all the bad reviews I see of these things. I love the 1/4 power mode, love the foot switchable effects loop (that I use as a boost). I agree that it needs to be loud ( and it is loud even in the 1/4 power mode). When I bought mine I had a fender tone master 412 cab with v30’s (still got it) and it sounded far better than the Jensen (IMO). I yanked out the Jensen and put a v30 in the combo too, it was a massive improvement to the amp and have never looked back. I also put a lower output preamp tube for the gain, and I think it’s made it better again(was too dirty on gain channel)I normally use the 412 cab, but if venue is small the 112 by itself is huge. Love the included casters and tilt back legs and nice canvas cover too. I’ve tried to find better, but keep coming back to the pro reverb, it’s a good all rounder, don’t read the reviews and write them off, if you see one plug it in and decide for yourself. DC

    Reply
  • January 4, 2016 at 3:38 pm
    Permalink

    I have had one for about 10 years, fabulous amp but heavy, I also have ’65 DRRI, the Pro is a far better amp in all areas except the weight. Never liked the overdrive sound on Fender master volume amps but this one is good and very usable, it has an effects loop, extension speaker out and 1/4 power switch, very versatile by far the best Fender I have had, the sound is amazing and loud. Unfortunately it is just too heavy for me these day, just lugged it up and down stairs at gig and have decided it’s time to sell it and use my Trademark 60 for gigging along with the DRRI for smaller rooms. Looking at a Roland Bluescube as well – and use the Trademark as a slave for outside gigs.

    Reply
  • January 30, 2016 at 8:12 am
    Permalink

    This might help…The Fender Pro Reverb is a high-end guitar amplifier made by Fender. It was in production from 1965 and was discontinued in 1982. The Pro Reverb is a 40-watt tube amplifier and has a pair of 12″ speakers; however, models later than 1976 were increased to 70 watts. Teagle and Sprung, authors of the definitive book on Fender amplifiers (Fender Amps: The First Fifty Years) described the Blackface Pro Reverb as the best amplifier ever produced likely due to its combination of the two twelve inch speakers, its high quality reverb and tremolo, and just the right amount of power to get either classic Blackface Fender cleans or natural tube breakup at reasonable volumes. They wrote, “the author recommends these amps as the best all-around amp ever made—by anyone”.[1]

    The Pro Reverb is most often used by players seeking a traditional Fender clean tone, with, owing to the relative low output power, propensity for ‘breakup,’ or musically-pleasing distortion. Many players note the quality of the tube driven spring reverb and tremolo (inaccurately referred to as “vibrato” by Fender). At a time when Fender was increasing the wattage of most of its tube amps in an attempt to provide players with cleaner tones at higher volumes, the Pro Reverb was somewhat unique in the Fender lineup due to its relatively low power output (prized by today’s players) and smaller output transformer, which gave the Pro Reverb a “dirtier” sound than most of its contemporaries. Because of this, at the time the Pro Reverb did not find the widespread popularity of amplifiers such as the Fender Twin, but in recent years it has seen a revival and has become highly sought after due to its rarity and excellent tonal characteristics.

    Pro Reverbs were first sold in mid-1965. Since CBS bought out Fender in January 1965, all of them are “post-CBS” Fenders. Even so, some have “Fender Electric Instruments Co.” on the front panel under the Pro Reverb Amp logo instead of the CBS era “Fender Musical Instruments.”

    The original Pro Reverbs are “blackface”—they have black control panels with white lettering, script logo, silver/black/white grille cloths, raised Fender logo on the grille cloth and black Tolex covering. They use two 5881/6L6GC power tubes, a GZ34 tube rectifier and are rated at roughly 40 watts. They have two channels, one of which has reverb and tremolo. A dual footswitch controls the effects. In excellent condition, with original speakers these amps were selling between $1900 and $2400 in 2010 (2011 Vintage Guitar Price Guide). Mint examples usually sell for more.

    Reply
  • January 30, 2016 at 5:57 pm
    Permalink

    Leo,

    I just saw one used one at Guitar Center (Atlanta, GA) listed for $799.00 and price reduced to $699.00. I have been trying to find out more about this amp. Please let me know if you found others listed and what they were selling for.

    Thanks

    Reply
  • March 20, 2016 at 2:53 pm
    Permalink

    I have one of these for sale in Hampshire. In excellent condition, superb gig amp but I don’t play much these days. All original including f/switch, cover, manual. Want to make me an offer? Tim

    Reply
  • March 28, 2016 at 11:51 am
    Permalink

    Craig, I had the same problem. Changed tubes and everything. Ended up being a dirty switch. The white pushbutton switch on the back between the loop input and output.
    All I did was kept pushing it to clean it. Everything is fine now. A dirty switch can cause a lot of problems. I’m sure you have it fixed by now. But, something to check periodically.

    Reply
  • February 20, 2017 at 2:30 pm
    Permalink

    Did anyone ever solve the noise problem in the reverb circuit?

    Reply
  • July 17, 2017 at 9:44 am
    Permalink

    I have one of the 2002 Fender Pro Reverb amps, I love it but the tremolo has not worked since the day I got it. Could it be a tube issue? Also the bright button on the clean channel seems to be stuck in the bright position and I cannot get it to disengage. If it’s gonna be stuck in one position I would rather it be stuck in the normal positiona nd not the bright position. Any help addressing these matters would be greatly appreciated

    Reply
  • January 19, 2018 at 1:38 pm
    Permalink

    Just picked up a 1999 Pro Reverb from the fine folks at Wildwood Guitars in Colorado – via Reverb.com site. It arrived just yesterday, but sadly the 4 button footswitch was not included or available.

    Does anyone know where I could purchase this footswitch or an acceptable replacement? I’ve emailed Fender just a few hours ago, but thought I would check in here.

    Love the sound – it is wonderful. Not sure why Fender would have the footswitch as the only way to activate the Tremolo, that seems shortsighted!

    Reply
  • March 6, 2018 at 3:44 am
    Permalink

    Hello from Finland. If you have problems with the reverb, squelch, feedback or noise or screaming… this is a solution which i made to my ptpr. Wrap an old t- shirt around the reverb tank. It will reduce the vibration from the cab. An isolation from resonation you got it….!? By the way it is an amp you can do anything with…

    Reply
    • July 14, 2021 at 9:02 am
      Permalink

      Thanks for the tip! Did you wrap the t shirt around the black reverb tank cover/casing, or just take that off?

      Reply
  • May 9, 2019 at 10:59 am
    Permalink

    Does anyone know where online I can buy replacement fuses for my Pro reverb? I’ve checked at all the hardware stores in town and can’t find an F3A 250V fuse anywhere!

    Reply
    • September 11, 2019 at 12:40 pm
      Permalink

      F3A 125V will be fine.

      Reply
  • November 7, 2019 at 2:39 am
    Permalink

    Hallo from Austria! I bought Pro Reverb new in 2003. It is indeed very loud and powerful. The beautiful clean sound was from the beginning a fantastic typical fender clear sparkling and the best I have played. Today it seems to me that it’s not that clear any more and brakes up already at volume 3. Also is not so loud any more. But I have never changed tubes over the years. Maybe that’s the reason?

    Today I use it in my apartment and there is the big disappointment, as the 1/4 power (12 Watt) was never functioning. Switching to 12 Watt has a loud “humm” and does not make any difference in loudness to full power. Can somebody confirm this problem or has any ideas if there is something wrong?
    Thanks in advance for your answers! Ricky

    Reply
  • December 8, 2022 at 11:09 pm
    Permalink

    I livemy ProReverb & the 1single 12 in Jensen is perfect . I like it has an effects loop so I can run my pedals thru it & the 4 button foot switch is the bomb
    I only wish it had a 2nd imput on channel 2 .
    I fought a 4×12 Fender closed back with 4 Celestine 30’s for outdoors. Perfect combination for that situation.
    Only bitch is it weighs 75 lbs . Luckily I don’t have to move it , the roadies do that but occasionally I have to & it sucks . But you can’t beat it for the money overall
    I use it in the studio @ I’m rally able to get the tone I desire on the first channel . I just turn it up & I use my couple of pedals to get a little more volume & time , But it’s nice that you can keep it real simple & it sounds great just the way it is . Totally satisfied with it & I got a super deal on it because someone didn’t like lugging it around . Mine is the rare one and I’m brand new condition with casters, cover & 4 button foot switch
    I’m blessed to have found it & it was to affordable to pass up but I see them going for 3-4 times what I paid . If you can lift it , buy it !!! Ha ha ha. Ha ha ha

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *