Fender Silverface Quad Reverb
Model/Circuit Number:
Years of Production: 1972 – 1979
Era:
Configuration: Combo
Controls: Silver, forward facing with blue labels
Knobs: Black skirted w/ chrome center, numbered 1 – 10
Faceplate
- Front: Normal: In, In, Bright Sw, Vol, Treb, Mid, Bass – Vibrato: In, In, Bright Sw, Vol, Treb, Bass, Rev, Speed, Intensity – Master Vol – Pilot Lamp
- Rear: AC Outlet, Ground Sw, Fuse (2½A), Power Sw, Standby Sw, Speaker Jack, Ex. Speaker Jack, Vibrato Jack, Reverb Jack, Reverb Out, Reverb In
Cabinet
- Dimensions: 31½ x 26½ x 11½
- Hardware: Medium Chassis Straps 4 5/8”
- Handle: Black Strap Handle
- Feet: Side Mounted Glides
- Corners: Corner Protectors
Covering Material
- Tolex/Tweed: Black Tolex
- Grill Cloth: Blue Sparkle Grill Cloth
Logo: Grille mounted, raised, chrome & black script
Weight: 89 3/4 lbs.
Speaker
- Size: 4 x 12
- Impedance: 4 ohms
- Model: Oxford 12T6, Utah V12PC or Rola 12(For more info, check out the Jensen Replacement Speakers)
Effects: Reverb, Tremolo
~Watts: 100 or 135 watts
Tubes
- Pre amp: 7025
- Power: 4 x 6L6GC
Bias: Fixed with Bias Pot
Rectifier: Solid State
Comments: A Line Out jack, hum balance pot, and a pull boost sw. were added near the end of the models run.
Pricing
Avg Model Year Price | Avg Monthly Price Chart | Avg Monthly Price | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NOTE: Trend is a linear fit to the weighted per-month average price. It only serves as an abstract notion of general direction of the data and is not to be considered a predictor of future vintage amplifier prices. |
|
I desperately need the push-pull/1 meg master volume pot. Can you help?
The hum balance pot, line out jack and distortion switch were introduced in 1977.
Other notable features included an ultralinear output transformer, scripted tailless amp decal and an orange sparkle grill cloth.
The Quad Reverb was discontinued in 1979.
I have one of these amps since it was made in 74. In addition this amp has a pot accessible from the bottom of the amp chassis which biases the 6L6s. In good condition this amp will belt it out with the best. But, it’s big draw back is the same with all stacks & half stacks. 89 LBS sucks for hauling it about.
I need an original preferbly in mint unused condition.
There is one listed on reverb, ebay, and CL in Birmingham, Alabama that appears in good shape, yet pricy.
I have a 79 Super Reverb I’m parting out. Trans and speakers are shot..