Fender Super 210
Years of Production: 1990 – 1992
Era:
Configuration: Combo
Controls: Black forward facing w/ white labels, controls numbered 1 – 10
Knobs: Red or Black Pointer Knob, Unnumbered
Faceplate
- Front: In, In, Vol (clean), Gain, Vol (drive), Channel Sw, Treb, Mid, Bass, Reverb, Presence, Footswitch In, Standby Sw, Power Sw, Pilot Lamp
- Rear: 8 Ohm Speaker Out, 4 Ohm Speaker Out, Line Out, Power Amp In, Pre Amp Out
Cabinet
- Dimensions:
- Hardware: Medium Chassis Straps 4 5/8”
- Handle: Black Strap
- Feet: Glides
- Corners: Corner Protectors
Covering Material
- Tolex/Tweed: Black Tolex
- Grill Cloth: Dark Gray Grillcloth
Logo: Grill mounted, raised, chrome & black script
Weight:
Speaker
- Size: 2 x 10
- Impedance:
- Model: (For more info, check out the Jensen Replacement Speakers)
Effects: Reverb
~Watts: 60 watts
Tubes
- Pre amp: 2 x 12AX7
- Power: 2 x 6L6gc
Bias: Fixed Bias
Rectifier:
Comments:
I have one of these that I use as a harmonica amp… I blew out one of the speakers, so I replaced both with Eminence Patriot speakers and it sizzles! I’m currently replacing the preamp tubes and I’m thinking about going with 5751’s instead of 12AX7’s simply to give my self a little more head room and control feedback a little better. Any thoughts? Thanks!
where can I get eminence patriot speakers?
http://www.mojotone.com/amp-parts/speakers-Eminence
I have one of the super 210’s and want to replace the speakers, considering greenbacks or creambacks, but I cant find the speaker ohms anywhere, what ohm speakers did you purchase?
Bob
Hi , recently researched the same problem. Stock speakers are 16 ohm each. Fender recommends that you replace stock speakers with the same , 16 ohm speakers. Enjoy your 210 !!
My buddy’s daughter picked one up for $10 at a garage sale. He messaged me to see if I wanted it. I promptly hauled butt and grabbed it up. Felt bad about the $32 I gave him… for like a second…
This is one monster of an amp!
I need a cover forthis amp… help!
You might check with ampcovers.com or Tuki Covers
Hi,
I would like replace the GAIN POT. I don’t find schematic of super 210.
On super 112 schematic they are indicate R5B 1M 10A . And on the pot there are: J0 0026046 9016
what pot should I order? tkx
I bought a Super 210 in the late 80s and still own it. Did you find a schematic? If not, I have one in a pdf doc I can email to you.
Hey Brian,
I just picked up a dead Super 210. Any chance I get a copy of that schematic sent to IFixAudio at Gmail dot com
hi, can you send me to me the schematic as well. Thanks. munkyver at yahoo.com