Fender Super 210

Years of Production: 1990 – 1992
Era:
Configuration: Combo
Controls: Black forward facing w/ white labels, controls numbered 1 – 10
Knobs: Red or Black Pointer Knob, Unnumbered
Faceplate

  • Front: In, In, Vol (clean), Gain, Vol (drive), Channel Sw, Treb, Mid, Bass, Reverb, Presence, Footswitch In, Standby Sw, Power Sw, Pilot Lamp
  • Rear: 8 Ohm Speaker Out, 4 Ohm Speaker Out, Line Out, Power Amp In, Pre Amp Out

Cabinet

Covering Material

  • Tolex/Tweed: Black Tolex
  • Grill Cloth: Dark Gray Grillcloth

Logo: Grill mounted, raised, chrome & black script
Weight:
Speaker

Effects: Reverb
~Watts: 60 watts
Tubes

  • Pre amp: 2 x 12AX7
  • Power: 2 x 6L6gc

Bias: Fixed Bias
Rectifier:

Comments:

13 thoughts on “Fender Super 210

  • October 4, 2011 at 10:59 am
    Permalink

    I have one of these that I use as a harmonica amp… I blew out one of the speakers, so I replaced both with Eminence Patriot speakers and it sizzles! I’m currently replacing the preamp tubes and I’m thinking about going with 5751’s instead of 12AX7’s simply to give my self a little more head room and control feedback a little better. Any thoughts? Thanks! 

    Reply
    • May 23, 2014 at 5:46 pm
      Permalink

      where can I get eminence patriot speakers?

      Reply
    • January 5, 2015 at 4:08 pm
      Permalink

      I have one of the super 210’s and want to replace the speakers, considering greenbacks or creambacks, but I cant find the speaker ohms anywhere, what ohm speakers did you purchase?

      Bob

      Reply
      • March 9, 2015 at 8:04 pm
        Permalink

        Hi , recently researched the same problem. Stock speakers are 16 ohm each. Fender recommends that you replace stock speakers with the same , 16 ohm speakers. Enjoy your 210 !!

        Reply
        • April 9, 2021 at 12:55 pm
          Permalink

          My buddy’s daughter picked one up for $10 at a garage sale. He messaged me to see if I wanted it. I promptly hauled butt and grabbed it up. Felt bad about the $32 I gave him… for like a second…

          Reply
  • January 12, 2012 at 7:08 pm
    Permalink

    This is one monster of an amp!

    Reply
  • March 30, 2014 at 5:14 pm
    Permalink

    I need a cover forthis amp… help!

    Reply
    • April 2, 2014 at 4:19 am
      Permalink

      You might check with ampcovers.com or Tuki Covers

      Reply
  • May 1, 2020 at 6:49 am
    Permalink

    Hi,

    I would like replace the GAIN POT. I don’t find schematic of super 210.

    On super 112 schematic they are indicate R5B 1M 10A . And on the pot there are: J0 0026046 9016

    what pot should I order? tkx

    Reply
    • March 14, 2022 at 7:39 pm
      Permalink

      I bought a Super 210 in the late 80s and still own it. Did you find a schematic? If not, I have one in a pdf doc I can email to you.

      Reply
      • June 11, 2022 at 1:36 pm
        Permalink

        Hey Brian,
        I just picked up a dead Super 210. Any chance I get a copy of that schematic sent to IFixAudio at Gmail dot com

        Reply
  • January 30, 2023 at 5:56 am
    Permalink

    hi, can you send me to me the schematic as well. Thanks. munkyver at yahoo.com

    Reply

Leave a Reply to steve Cancel reply

Your email address will not be published. Required fields are marked *